Poulan Pro PR675Y22RHP Operator's Manual page 16

3. Secure rear of side discharge deflector
to lawn mower housing with knob.
• Mower is now ready for side discharg-
ing operation.
SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR 18" HI-VAC:
FOR MULCHING -
1. Grass catcher, discharge chute and
side discharge deflector removed.
2. Mulcher door secured to mower hous-
ing with knob.
FOR REAR BAGGING -
1. Side discharge deflector removed.
2. Grass catcher and discharge chute
installed with discharge chute secured
to lawn mower housing with knob.
FOR SIDE DISCHARGING -
1. Grass catcher and discharge chute
removed.
2. Side discharge deflector installed and
secured to mower housing with knob.
CAUTION: Do not run your lawn
mower with out mulcher door closed; side
discharge deflector installed, or discharge
chute and ap proved grass catcher in
place. Never at tempt to op er ate the lawn
mow er with mulcher door re moved or
propped open.
TO EMPTY GRASS CATCHER
1. Remove grass catcher with clippings
from lawn mower using both front and
center of handle as shown.
2. Empty clippings from grass catcher.
3. Reinstall grass catcher on rear door.
NOTE: Do not drag the bag when empty-
ing; it will cause unnecessary wear.
OPERATION
Handle
21" (53cm) HI-VAC MODELS:
Your lawn mower was shipped ready to
be used as a mulcher. To convert to rear
bagging or side discharging:
REAR BAGGING
1. Remove knob securing mulcher door
to lawn mower housing.
Round
door
Discharge
chute
Mulcher door
2. Open mulcher door and insert tabs
of discharge chute into hinge bracket
opening and position rear of chute
over threaded stud.
Discharge chute tabs
Hinge bracket
16
Rear handle
Crossbar
Grass
catcher
Knob
Threaded
stud
Mulcher door