Advertisement
Electric shock- condition that may pose shock to the user.
NAG/IM/Metcal 1200/01/22
This instrument must be plugged into a 230 V
AC, 50 Hz, electric outlet only.
The power cord of the instrument is
equipped with a three-pin grounding plug for
protection against electrical shock hazards. It
must be plugged directly into a properly
grounded three-pin socket. The receptacle
must be installed in accordance with local
codes and ordinances. Do not use an
extension cord or adapter plug.
Always replace the power cord with an
approved cord of correct rating and type.
If supplied with user accessible fuses, always
replace the fuse with one of the same rating
voltage and type
If a main power supply fluctuation occurs,
immediately turn off the instrument. Power
bumps from brown-outs could damage the
instrument. Wait until the power has
stabilized.
22
Advertisement
