Table of Contents
Advertisement
c. Time setting
If the meter is used at first time, it should to adjust the
clock time exactly, please refer chapter 7-2 ( page 11 ).
d. Decimal format setting
e. 3 Information of LCD display
* If the Display show :
CH-
CArd
* If the Display show :
LobAt
* If the Display show :
no
CArd
The numerical data structure of SD card is
default used the " . " as the decimal, for
example "20.6" "1000.53" . But in certain
countries ( Europe ...) is used the " , " as the
decimal point, for example " 20, 6 "
"1000,53". Under such situation, it should
change the Decimal character at first, details
of setting the Decimal point, refer to Chapter
7-5, page 13.
It means that the SD card exist the problem
or the SD card memory is full, it should
change SD memory card.
It means that the battery is low voltage.
Under such condition, the Datalogger
function is disable.
It means that the SD card is not plugged
into the meter.
6
Advertisement
Table of Contents
