Rails - Bosch CMG8760 1 Series User Manual And Installation Instructions

Table of Contents

Advertisement

a Once the drying process has ended, an audible sig-
nal sounds and the display shows the cooking time
as zero.
20  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
20.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Pull out the pull-out forwards.
1.
Lift the rail forwards slightly
2.
Swivel the entire rail outwards
3.
the rear
⁠ .
20.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle
and detach it
⁠ .
and unhook it at
⁠ .
Press
to switch the appliance off.
5.
To dry the cooking compartment completely, leave
6.
the appliance door open for 1 to 2 minutes.
Hook the front retainers in at the bottom and
2.
straighten them
⁠ .
Hook the rear retainers with the hook into the top
3.
hole
and push them into the bottom hole
20.3 Attaching the rails
Notes
¡ When hanging the rails, ensure that the pull-out is at
the bottom.
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
Set the rear rail at an angle, hooking it into the re-
1.
tainers at the top and bottom
Pull the rail forwards
2.
Hook in the rail at the front
3.
Push the pull-outs in completely.
4.
Rails en
⁠ .
⁠ .
⁠ .
and press it down
.
25

Advertisement

Table of Contents
loading

Table of Contents