Seiko SSE017J9 Complete User Manual page 18

8x82 gps solar watch (chronograph)
Table of Contents

Advertisement

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
How to adjust the time zone
Go to a place where
1
GPS signals can be
easily received
Move to the outdoors under
an open sky with good
visibility.
 Place where GPS signals
can be easily received/Place
where GPS signals cannot
be received
P. 15
Continue to press Button B (6 seconds),
2
and then release it when the second hand
moves to the 30-second position.
 Although the second hand moves to the
0-second position 3 seconds after pressing
Button B, continue to press it.
When the second hand has reached the
30-second position, reception is started.
The indicator hand points to "4+. "
Press for
6 seconds.
 While the indicator hand points to "E" or
reception is not started even with operation for
reception.
When the hand points to "E, " charge the watch
by expose to light.
How to charge the watch
P . 13
Check whether the watch is able/unable to
receive GPS signals
Check the charging status
P . 12
When the hand points to
, reset the in-flight
mode ( ).
How to reset in-flight mode ( )
P . 20
 When the stopwatch is operating, the reception
function will not be activated.
3
Direct the watch face upward and wait
 Please note that it may be difficult to receive GPS
signals while you are in motion.
It takes a maximum of
2 minutes to complete
reception.
 It depends on the receiving
conditions.
<
Display during reception (= satellites acquisition
>
status)
The second hand indicates ease of receiving
(= number of GPS satellites from which GPS
signals are received).
 The larger the
number of acquired
satellites there are,
,
the easier it is to
receive GPS signals.
Second
hand
position
25-second
Number of
satellites
5 units
 Even when the hand
points to 4 units or more,
reception may not be
allowed.
 To cancel the reception,
press Button A.
17
ASTRON 8X82 GPS SOLAR           
When the second hand points to
4
"Y" or "N," reception is
completed.
The reception result is displayed for 5
seconds.
Then, the hour and minute hands move,
and the time and date are adjusted.
(The time zone is also adjusted to the
local time zone.)
Reception
Y: Successful
result
(52-second
display
position)
Display
0 units
State
2 units
watch as it is.
3 units
Check that the reception is successful
May
after the watch returns to the time
receive
display mode.
4 units
 Check that the reception was
5 units
successful
6 units
 Check the time zone setting
 During movement of the date, the buttons
and crown cannot be operated.
 Manually set DST (Daylight Saving Time).
 Set DST (Daylight Saving Time)
Press
Button A.
P. 18
N: Failed
(38-second
position)
When the reception
Use the
result is displayed as
"N"
P . 15
P. 27
P. 16

Advertisement

Table of Contents
loading

This manual is also suitable for:

AstronSse017j1Sbxb017

Table of Contents