Honda CIVIC Sedan 2020 Owner's Manual page 632

uuJump StartinguJump Starting Procedure
■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
630
1What to Do After the Engine Starts
The indicators for the Adaptive Cruise Control
(ACC) * , Adaptive Cruise Control (ACC) with Low
Speed Follow * , Road Departure Mitigation, Vehicle
Stability Assist® (VSA®) system, Vehicle Stability
Assist® (VSA®) OFF, Low Tire Pressure/TPMS
Collision Mitigation Braking System
come on after re-connecting the battery. Drive a
short distance at more than 12 mph (20 km/h). The
indicators should go off. If they do not, have your
vehicle checked by a dealer.
* and
TM (CMBS TM ) may