Advertisement
IMPORTANT SAFEGUARDS
When using your garment steamer, basic safety precautions
should always be lollowed, including the following:
Read all instructions before using the garment steamer.
1.
2. Use garment steamer only for its intended use.
3. To protect against a risk of electric shock, do not
immerse the garmenl steamer in water or other liquids
4. Never yank cord to disconnect from outlet; instead, grasp
plug and pull to disconnect.
5. Do not allow cord to touch hot surfaces. Loop cord loosely
around garment steamer when storlng.
6. Do not operate garment steamer with a damaged cord or if
the garment steamer has been dropped or damaged. To
avoid the risk of electric shock, do not disassemble the
garment steamer. Take it to the nearest Sunbeam
Appliance Service Company station or authorized
independent service station for examination and repair.
Incorrect reassembly can cause a risk of electric shock
when the garment steamer is used.
7. Close supervision is necessary for any appliance being
used by or near children. Do not leave garment steamer
unattended while connected.
6. Burns can occur from contact with hot water, or steam.
Use caution when you turn the garment steamer upside
down-there may be hot water in the reservoir.
9. The use of accessory attachments not recommended by
Sunbeam Appliance Company may result in fire, electric
shock or personal injury.
SAVE THESE INSTRUCTIONS
CAUTION: Never point garment steamer at another person
Unpack the appliance. Please read
instructions carefully
the
before use, and keep in a safe place for future reference.
FEATURES OF YOUR
GA
ME
STEA
SUNBEAM
R
NT
Hanging
Water Tank
Release
Button
.
Shot of Steam@ Butto
B o d y
Detachable Lint and
Vents
Detachable
Clothes Brush
REMOVING THE
WATER
TANK
Press the water tank release
button and pull the handle
and button assembly away
from the body of the steamer.
MER
WATER
Tap water may be used, how-
ever, In areas of the country
where the water is very hard
we recommend the use of
demineralized
or
water lo prolong the steam-
ing function of your ap
pliance. DO NOT use water
passed through home water
softening
systems
such water contains minerals
that may be harmful to the
garment
steamer's
components.
Insert the filled water lank
back Into the steamer assem-
bly with the button projection
water Leve
on the tank nesting into the
. . .
indicator
button slot on the steamer.
WATER LEVEL
INDICATOR
T h e w a t e r l e v e l i n d i c a t o r
shows at any time whether
there is sufficient water in the
lank. To check the reservoir
level, hold garment steamer
so that the waler window is
vertical. Check level and
as
necessary.
USING THE
GARMENT STEAMER
Plug the cord into a 120 volt,
AC
electrical
outlet.
about 45 seconds It will reach
working temperature. A jet of
steam can then be produced
about every 2 seconds by
pressing the steam button.
.
distilled
because
internal
refill
After
Advertisement
