Childproof Lock; Activating The Childproof Lock; Deactivating The Childproof Lock - Siemens WP40A2X0HK User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
The display shows the following
¡
after drying: "End"
or the display shows the following
¡
during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
Empty the condensation container.
2.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→ "Inserting the condensation con-
tainer", Page 32
32
.
Inserting the condensation
container
Push the condensation container
in as far as it will go.
13 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
13.1 Activating the childproof
lock
Press and hold the two
buttons for approx. 3 seconds.
The display shows
a
The control elements are locked.
a
The childproof lock remains active
a
even after the appliance has been
switched off and in the event of a
power cut.
13.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
buttons for approx. 3 seconds.
goes out in the display.
a
3 sec.
.
3 sec.

Advertisement

Table of Contents
loading

Table of Contents