Table of Contents
Advertisement
To avoid TV interference, make sure to use an
undamaged antenna cable.
Picture contours are distorted
Change the current setting of [CineMotion]* to
other settings.
General
The TV turns off automatically (the TV enters
standby mode)
Check if the [Sleep Timer]* is activated.
Check if the [Duration]* is activated by [On Timer]*
or [Photo Frame Settings]*.
Check if the [Idle TV Standby]* is activated.
Some input sources cannot be selected
Select [Manage Inputs]* and select [Always]* of
the input source.
The remote control does not function
Replace the batteries.
* For more detailed information, press HOME on the
remote control, then select [Help Guide] under
[Settings] menu.
22
US
Specifications
System
Television system
Analog: NTSC/PAL-M/PAL-N
Digital: ISDB-T/ISDB-T
Channel coverage
Depending on your country/area selection
Analog: UHF/VHF/Cable
Digital: UHF/VHF
Panel system
LCD (Liquid Crystal Display) Panel, LED Backlight
Speaker output
5 W + 5 W (8 ohms, 1 kHz, 10% THD (Total
Harmonic Distortion), 127 V)
Wireless technology
Protocol IEEE802.11b/g/n
Input/Output jacks
CABLE/ANTENNA
75 ohm external terminal for RF inputs
VIDEO IN
Video input (phono jack)
AUDIO IN
Audio input (phono jacks)
HDMI IN 1/2 (HDCP 1.4-compatible)
Video:
1080p(30, 50, 60 Hz), 1080/24p,
1080i(50, 60 Hz), 720p(30, 50, 60 Hz), 720/24p,
576p, 576i, 480p, 480i
PC input:
(Resolution (Horizontal frequency, Vertical
frequency))
640 × 480, 31.5 kHz, 60 Hz
800 × 600, 37.9 kHz, 60 Hz
1,024 × 768, 48.4 kHz, 60 Hz
*1,280 × 720, 44.8 kHz, 60 Hz
1,280 × 1,024, 64.0 kHz, 60 Hz
1,152 × 864, 67.5 kHz, 75 Hz
1,600 × 900, 55.9 kHz, 60 Hz
1,680 × 1,050, 65.3 kHz, 60 Hz
*1,920 × 1,080, 67.5 kHz, 60 Hz
* The 1080p and 720p timing when applied to the
HDMI input will be treated as a video timing and
not PC timing for Wide Mode.
Audio:
Two channel linear PCM: 32/44.1/48 kHz 16/20/
24 bits, Dolby Digital, Dolby Digital Plus, DTS
B
Advertisement
Table of Contents
