C) Dab Operation - Renkforce RF-DAB-Mono1 Operating Instructions Manual

c) DAB Operation

Station scan
• If you cannot receive any DAB station after selecting DAB mode, push the button SCAN (5).
• The device will then perform a station scan in the DAB reception range as after first activation
and saves the stations found in the station list.
• During the search, the display (4) shows progress and the number of stations found.
Station selection from the station list
• Push the button PREV. (3) or NEXT (8), to select the desired station.
• Confirm your selection by pushing the dial switch (6).
Station storage
• The device can save up to 10 DAB stations.
• Select the DAB station to be saved as described above.
• Press and hold the PRESET (2) button until the list of the station memory appears in the
display (4).
For empty station slots, no station name is displayed; if the station slot is already
occupied, the name of the station saved there is displayed.
• Use PREV. (3) or NEXT (8) to select the desired memory slot and confirm the selection by
pushing the dial switch (6).
• To delete a saved station, just save another station on its storage space.
Selection of stored stations
• Push the button PRESET (2) briefly and use the PREV. (3) or NEXT (8) button to select the
desired station.
• Confirm your selection by pushing the dial switch (6).
When no station is saved on the chosen station button, the currently set station will
continue to play.
33