Trouble shooting anomaly Cause solution Check the general switch ,the plug and the feeding cable Electrical power is missing The machine does not use a proper voltage. the input voltage is wrong. start stop using and apply for authorized assistance other reasons from the manufacturer.
It is not allowed to dis-assemble or modify the machine without the permission of the manufacturer. Operation 1/ The machine has the following control devices on the front panel: model DR-1A EMP-DR12 DR-3A A--- Red button to stop the machine B--- Green button to start the machine Voltage(v) 230V...
Page 4
02-30-017 Back Cover 02-30-039 Transit Ring 02-20-023 For EMP-DR12, when the dough comes out from the upper roller, you will see thin dough, with an Screw 02-30-060 Transit Ring 02-20-022 oval shape with the help of the hook, the dough will turn 90°automatically and ready for the next...
Maintenance Spare part list 1/ Before effecting any kind of maintenance or cleaning you must take out the plug .It is important not to use chemical, abrasive or corrosive products. Absolutely do not use running water, abrasive and not smooth tools, such as metal wool etc.;...
Page 6
Regulate the thickness: Spare part list regulating the machine can only be recommended as there are different characteristics of the dough, the weight , the EMP-DR15 serial thickness, the size and the shape of the dough. Therefore the correct regulating of the machine must be made by experience. The machine is provided with a medium size regulation for the shapes of pizza .