Advertisement
Available languages
Available languages
EN
26
OPERATION
Switching the unit on and off
When the plug is inserted into the power outlet, the unit will turn on automatically.
Note: If you unplug the unit, wait 5 minutes before plugging it back in to avoid
damaging the compressor.
Switching the interior light on and off
Press and hold control button for 3 seconds to turn the interior light on or off.
The light will remain on continuously as long as it is not turned off.
Temperature display
•
The temperature is displayed in digital form. When you set the temperature,
the set temperature is displayed. After the temperature has been set, the set
temperature is displayed.
•
If the temperature sensor is defective, the display will show [HH] or [LL]
instead of a digital number while a continuous buzzing sound is heard. For
this case, the unit is designed to run the compressor and fans regularly to
keep the cold in the cabinet and protect your stored wines.
Adjust temperature
•
The temperature can be adjusted from 5-20 °C.
•
Press the control button repeatedly to set the desired temperature.
•
The digital display will change to indicate the set temperature after 5 seconds
without being touched.
Note: When you start the device for the first time or switch it on again after a
longer period of time, it may happen that the set temperature deviates from the
displayed temperature by a few degrees. This will normalize within a few hours.
Advertisement
Chapters
