Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch PRP6A6B70A
Summary of Contents for Bosch PRP6A6B70A
- Page 1 Built-in gas hob PRP6A6B70A User manual and installation instructions [en]...
- Page 2 PRP6A.B7.A Component Pan support Control knobs Economy burner with an output of up to 1,10 kW Standard-output burner with an output of up to 1,90 kW High-output burner with an output of up to 2,80 kW The images shown in these instructions are for guid- ance only.
- Page 3 Safety en Futher information and explanations are available online: Table of contents 1.2 Intended use The appliance can only be used safely if it is INFORMATION FOR USE correctly installed according to the safety in- structions. The installer is responsible for en- Safety .............. 3 suring that the appliance works perfectly at its 1.4 Safe installation .......... 4...
- Page 4 en Safety 1.4 Safe installation 1.5 Safe use Follow these safety instructions when in- WARNING ‒ Risk of explosion! stalling the appliance. Escaping gas may cause an explosion. WHAT ¡ Read the installation instructions carefully. TO DO IF YOU SMELL GAS OR IF THERE → "Installation instructions", Page 6 ARE FAULTS IN THE GAS INSTALLATION ¡...
- Page 5 Safety en Escaping gas may ignite. WARNING ‒ Risk of poisoning! ▶ If the burner does not ignite after Using the gas cooking appliance leads to a 10 seconds, turn the control knob to the build-up of heat, moisture and combustion "Off" position and open the door or window products in the room where the appliance is in the room.
-
Page 6: Installation Instructions
en Installation instructions ▶ Do not use the appliance. An ingress of moisture can cause an electric ▶ Call the customer service. shock. Cookware that is not the right size, or that is ▶ Do not use steam- or high-pressure clean- damaged or incorrectly positioned may cause ers to clean the appliance. - Page 7 Installation instructions en ¡ Seal the cut surfaces of wooden work surfaces with ¡ Height of the pan support above the worktop sur- a special glue seal to protect them from moisture. face: up to 60 mm. ¡ Any adjoining vertical wall surface situated within 200 mm from the edge of any cooktop burner must be a suitable non-combustible material for the entire length of the cooktop, in accordance with clause...
-
Page 8: Positioning The Appliance
en Installation instructions ¡ This appliance is connected to the mains (240 VAC) 2.5 Positioning the appliance by means of the connecting lead. The connecting Note: Do not remove the adhesive seal fitted on the lead must be fixed to the kitchen unit to prevent it lower edge of the cooktop. - Page 9 Installation instructions en ¡ Position of the inlet connection ¡ Connect with flexible hose. The hose assembly must comply with AS/NZS 1869, 10 mm ID, class B or D, no more than 1.2 m long and installed in accord- ance with AS/NZS 5601.1. Note: If installing with a hose assembly: ¡...
- Page 10 en Preventing material damage With the tip of the screwdriver, push down on the Adjust the bypass screws: flexible rubber holder to access the bypass screw. A: For ULPG, the bypass screws must be ‒ tightened properly. B: For Natural Gas, the bypass screws must fin- ‒...
-
Page 11: Familiarising Yourself With Your Appliance
Environmental protection and saving energy en Do not place anything, for example, flame tamer or Damage may occur if hard or pointed objects fall on ▶ asbestos mat, between pan and pan support as ser- the cooktop. ious damage to the appliance may result. Do not let hard or pointed objects fall onto the cook- ▶... -
Page 12: Pan Supports
Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. → Page 16... -
Page 13: Basic Operation
Basic operation en 7 Basic operation ¡ The burner holes and grooves must be clean to en- 7.1 Igniting a gas burner sure a correct flame. The cooktop has automatic ignition of the burners. → "Cleaning the burners", Page 15 WARNING ‒ Risk of fire! Escaping gas may ignite. 7.2 Safety system If the burner does not ignite after 10 seconds, turn ▶... -
Page 14: Cleaning And Servicing
en Recommended settings for cooking Place the cookware right The cookware may tip WARNING ‒ Risk of fire! in the centre of the over if it is not placed in Flammable objects may ignite. burner. the centre of the burner. Maintain a distance of at least 50 mm between the ▶... -
Page 15: Troubleshooting
Troubleshooting en Completely dry the appliance. If there are water 10.2 Cleaning the appliance droplets or damp areas at the start of cooking, this ATTENTION! may damage the enamel. When the control knob is removed while cleaning the Insert the burner parts. Ensure that the burner caps appliance, humidity may get in and damage the interior are correctly positioned on the flame spreader. -
Page 16: Customer Service
en Service Fault Cause and troubleshooting Automatic ignition is The burner parts are positioned incorrectly. not working. Correctly position the burner parts. ▶ The appliance is not earthed or has not been connected correctly, or the earth cable is damaged. Contact an electrician. ▶... - Page 17 Disposal en 14 Disposal 14.1 Disposing of old appliance Valuable raw materials can be reused by recycling. Unplug the appliance from the mains. Cut through the power cord. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local author- ity.
- Page 20 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the PRP6A6B70A and is the answer not in the manual?
Questions and answers