Stealth Cam STC-WD3RT User Manual page 27

Testing the camera coverage area.
One of STC-WD3RT Cam's many features is the ability to test
the coverage area.
•
After mounting the camera, open front housing and slide the
power to ON.
•
After the font LCD screen has powered on. Press the [TEST]
button (this must be done with in 30 seconds or the camera will
enter count down mode)
•
Close the front housing.
•
Walk around in the front of the camera to see if you have
mounted camera in the proper position. A green indicator light
on the front will blink on when you have intruded the coverage
area.
•
Adjust the camera position as needed and repeat testing until
the desired coverage area is achieved.
www.stealthcam.net
STC-WD3RT
Toll Free 877-269-8490 27