Stealth Cam STC-WD3 User Manual page 19

Set TV System: NTSC is the correct setting for all of North
America. Your Stealth Cam STC-WD3 comes pre-programmed for
NTSC.
•
Press the [UP] or [DN] button to highlight TV OUT.
•
Press [OK] to enter the setting.
•
Press the [UP] or [DN] to set the TV output in NTSC or PAL
system.
•
Press [OK] again to save the setting. This will return you to the
SETTING SCREEN menu.
•
Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.
If no buttons are pressed within 30 seconds, the unit will return 1-
minute count down mode then start PIR capturing.
www.stealthcam.net
STC-WD3
Toll Free 877-269-8490 19