Stealth Cam STC-WD1 User Manual page 16

Set the Capturing sequence. The Stealth Cam STC-WD1 can be
programmed to shoot 1-3 pictures per triggering or 10 seconds of
video.
•
This icon will be blinking
•
Press [OK] button to choose the selection
•
Press the [UP] or [DN] button to select the desired capture
setting (number of pictures per triggering).
1picture / 2 pictures / 3 pictures
•
Press [OK] to save and exit to TIME OUT setting.
Set the Time out:
•
The word TIME OUT and Digit will be blinking
•
Press [OK] button to choose the selection
•
Press [UP] or [DN] button to increase or decrease the time
value in minutes from 01 to 59 minutes.
•
Press [OK] to save the setting and exit to Date & Time setting.
www.stealthcam.net
STC-WD1
Toll Free 877-269-8490
or Video
16