Stealth Cam STC-AD3X User Manual page 29

Using t he camera in PIR detection mode
•
Mount the camera to tree or other sturdy object using eithe
two supplied tree
mounting suggestions section in this
•
Open the front housing and move the switch to the ON posit
•
The camera's green test light will begin blinking and enter
count down mode. This is your indication to leave the coverage
area within one minute.
•
After one minute the camera will take between 1~3 pictures
a 10 seconds AVI video based on your program setting. The
camera will then time ou
on your setting.
The time between motion detection and the camera takin
the pictures may vary due to lighting conditions, charging
of the flash, pro
The flash light will only activate in low light conditions
when set in Auto Flash.
When the camera is set to AVI capturing, the 10 second
screw or mounting strap (Please refer to the
gram setting and battery power level.
www.stealthcam.net
STC-AD3X
t between 1 ~ 60 minutes also based
Toll Free 877-269-8490
manual)
r
ion.
or
g
s
29