Stealth Cam STC-AD3X User Manual page 28

Te ting the camera coverage area s
One of STC-AD3X Cam's many
coverage area.
•
After mounting the camera, open front housing and slide
power toggle switch to TEST.
•
Close the front housing.
•
Walk around in the front of the
mounted camera in the p
on the front will blink on when y
area.
•
Adjust the camera position as needed and repeat testing until
the desired coverage area is achieved.
•
When you have completed the testing the coverage area, open
the front housing and slide the power toggle switch from TEST
to ON position. This will exit the test mo
then enter count down mode for 1 minute and front green
indicator will start continuous blinking giving you one minute to
leave the coverage area. Then the camera will enter PIR
detection mode.
www.stealthcam.net
STC-AD3X
features is the ability to test the
camera to see if you have
roper position. A green indicator light
ou have intruded the coverage
Toll Free 877-269-8490
de. The camera will
the
28