DeWalt DCMWP600 Instruction Manual page 20

English
Safety Key (Fig. T)

DANGER: Sharp moving blade. In order to prevent
accidental start‑up or unauthorized use of your
cordless mower, a removable safety key has been
incorporated into the design of your mower. The mower
will be completely disabled when the safety key has
been removed from the mower.

DANGER: Rotating blades can cause serious
injury. To prevent serious injury, turn unit off and
remove safety key and battery pack when unattended,
or when charging, cleaning, servicing, transporting,
lifting, or storing mower.
1. Insert safety key 6 into the key slot
the main handle 4 , until it is fully seated inside of the
key slot 50 as shown in Fig. T.
2. The mower is now operational.
LED Dashboard Indicators (Fig. A, U)
The LED dashboard 12 contains the state of
charge indicator, load meter indicator, temperature
indicator, handle folding indicator, blade sharpening
indicator and reset button.
State of Charge Indicator (Fig. U)
The DCMWP600 and DCMWSP650 are equipped with a
state of charge indicator. This will display the current level
of charge in the battery during use. It does not indicate tool
functionality and is subject to variation based on product
components, temperature and end-user application.
• The state of charge indicator LEDs
indicating the percent of charge in the battery.
• When all 5 state of charge indicator LEDs
the battery is fully charged.
• When one state of charge indicator LED
charge is low and then it will flash when the battery
is discharged. Remove the battery and charge it.
State of Charge Indicator LED Status
LEVEL OF CHARGE
100% - 85%
70% - 85%
50% - 70%
18
50 , located on
18 will illuminate,
18 illuminate,
18 illuminates,
CHARGE INDICATOR
LED COLOR
White
White
White
LEVEL OF CHARGE
25% - 50%
≤25%
Low battery shutdown
Handle Folding Indicator (Fig. U)
The handle folding indicator
single touch handle 1 is not engaged in the operating
position when the safety key
installed, and the bail handle
handle folding indicator
Touch Handle section in this manual.
Cutting Load Meter Indicator (Fig. U)
The cutting load meter indicator
yellow or red when mowing.
• White indicates a low cutting load.
• Yellow indicates a medium cutting load.
• Red indicates a high cutting load. Runtime will be
reduced if there is a prolonged high load while mowing.
Overheat Indicator (Fig. U)
• The overheat indicator
then blink when the battery or motor is overloaded
during operation.
• The overheat indicator
blink when the module has reached a high temperature.
• To clear the overheat indicator
mower to cool down. When cooled, restart the mower and
resume cutting with the mower deck set higher.
Blade Sharpening Indicator (Fig. U)
The blade sharpening indicator
the blades need service. Sharpen or replace the blades, refer
to the Blade Sharpening section in this manual.
CHARGE INDICATOR
LED COLOR
White
White
White and blinking
15 will illuminate when the
6 and battery pack 26
8 is pulled. To clear the
, refer to the Raise the Single
15
14 will illuminate white,
13 will illuminate amber and
13 will illuminate red and then
13 , allow the battery and
16 will illuminate when
are