Advertisement
Quick Links
Altronix/Hartmann Controls Kits
Models Include:
T1HCK3F
Up to 8 Door Kit
Fully assembled kit includes:
- Trove1 enclosure with
THC1 Altronix/Hartmann Controls backplane
- One (1) eFlow6NB - Power Supply/Charger
T1HCK3F4
Up to 8 Door Kit with Fused Outputs
Fully assembled kit includes:
- Trove1 enclosure with
THC1 Altronix/Hartmann Controls backplane
- One (1) eFlow6NB - Power Supply/Charger
- One (1) ACM4 - Fused Access Power Controller
All components of these Trove kits are UL Listed sub-assemblies.
Please refer to the included corresponding Sub-Assembly Installation Guides for further information.
Installation Guide
All registered trademarks are property of their respective owners.
Rev. T1HC082423
Installing Company: _________________________ Service Rep. Name: __________________________________________
Address: _________________________________________________________ Phone #: _________________________
Access & Power Integration
T1HCK3F4D
Up to 8 Door Kit with PTC Outputs
Fully assembled kit includes:
- Trove1 enclosure with
THC1 Altronix/Hartmann Controls backplane
- One (1) eFlow6NB - Power Supply/Charger
- One (1) ACM4CB - PTC Access Power Controller
Advertisement
Related Manuals for Hartmann Altronix T1HCK3F4D
Summary of Contents for Hartmann Altronix T1HCK3F4D
- Page 1 Models Include: T1HCK3F Up to 8 Door Kit Fully assembled kit includes: - Trove1 enclosure with THC1 Altronix/Hartmann Controls backplane - One (1) eFlow6NB - Power Supply/Charger T1HCK3F4 T1HCK3F4D Up to 8 Door Kit with Fused Outputs Up to 8 Door Kit with PTC Outputs...
-
Page 2: Configuration Chart
Altronix/Hartmann Controls Trove kits are pre-assembled and consist of Trove enclosure with factory installed Altronix power supply/chargers and sub-assemblies. Each kit also accommodates one (1) Hartmann Controls PRS_Master boards and up to four (4) PRS_TDM or PRS_IO8 boards. Configuration Chart:... - Page 3 1. Align the Hartmann Controls boards on the backplane to match the boards’ mounting holes with corresponding pems. 2. Fasten spacers (provided) to pems that match the hole pattern for Hartmann Control boards (Fig. 2, 2a, pg. 3). Note: Hartmann Controls boards must be properly grounded.
- Page 4 1. Align the Hartmann Controls boards on the backplane to match the boards’ mounting holes with corresponding pems. 2. Fasten spacers (provided) to pems that match the hole pattern for Hartmann Control boards (Fig. 3, 3a, pg. 4). Note: Hartmann Controls boards must be properly grounded.
- Page 5 Notes: THC1 Kits Installation Guide - 5 -...
- Page 6 Notes: - 6 - THC1 Kits Installation Guide...
- Page 7 eFlow Power Supply/Chargers can be Controlled and Monitored while Reporting Power/Diagnostics from Anywhere over the Network... LINQ2 - Network Communication Module LINQ2 provides remote IP access to real-time data from eFlow power supply/chargers to help keep systems up and running at optimal levels. It facilitates fast and easy installation and set-up, minimizes system downtime, and eliminates unnecessary service calls, which helps reduce Total Cost of Ownership (TCO) - as well as creating a new source of Recurring Monthly Revenue (RMR).
- Page 8 4.5” (114.3mm) (69.9mm) 1.115” (28.3mm) 1.36” (34.5mm) 1.25” (31.8mm) Hartmann Controls is not responsible for any typographical errors. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 10 Lockhart Rd, Barrie, ON L4N 9G8, Canada | phone: 1-877-411-0101 web site: www.hartmann-controls.com | e-mail: sales@hartmann-controls.com IITHC1 Kit Series H24W...
Need help?
Do you have a question about the Altronix T1HCK3F4D and is the answer not in the manual?
Questions and answers