Hartmann T1HCK3F Installation Manual

Up to 8 door kit, up to 8 door kit with fused outputs

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Access & Power Integration

T1HCK3F

Up to 8 Door Kit

Fully assembled kit includes:

- Trove1 enclosure with THC1 Altronix/Hartmann Controls backplane

- One (1) eFlow6NB - Power Supply/Charger

T1HCK3F4

Up to 8 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove1 enclosure with THC1 Altronix/Hartmann Controls backplane

- One (1) eFlow6NB - Power Supply/Charger

- One (1) ACM4 - Fused Access Power Controller

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

Installation Guide

All registered trademarks are property of their respective owners.

Rev. T1HC052820

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

Table of Contents

Need help?

Do you have a question about the T1HCK3F and is the answer not in the manual?

Questions and answers

Summary of Contents for Hartmann T1HCK3F

Page 1 Access & Power Integration T1HCK3F Up to 8 Door Kit Fully assembled kit includes: - Trove1 enclosure with THC1 Altronix/Hartmann Controls backplane - One (1) eFlow6NB - Power Supply/Charger T1HCK3F4 Up to 8 Door Kit with Fused Outputs Fully assembled kit includes:...
Page 2 Altronix/Hartmann Controls Trove kits are pre-assembled and consist of Trove enclosure with factory installed Altronix power supply/chargers and sub-assemblies. Each kit also accommodates one (1) Hartmann Controls PRS_Master boards and up to four (4) PRS_TDM or PRS_IO8 boards. Configuration Chart:...
Page 3 1. Align the Hartmann Controls boards on the backplane to match the boards’ mounting holes with corresponding pems. 2. Fasten spacers (provided) to pems that match the hole pattern for Hartmann Control boards (Fig. 2, 2a, pg. 3). Note: Hartmann Controls boards must be properly grounded.
Page 4 1. Align the Hartmann Controls boards on the backplane to match the boards’ mounting holes with corresponding pems. 2. Fasten spacers (provided) to pems that match the hole pattern for Hartmann Control boards (Fig. 3, 3a, pg. 4). Note: Hartmann Controls boards must be properly grounded.
Page 5 Notes: THC1 Kits Installation Guide - 5 -...
Page 6 Notes: - 6 - THC1 Kits Installation Guide...
Page 7 eFlow Power Supply/Chargers can be Controlled and Monitored while Reporting Power/Diagnostics from Anywhere over the Network... LINQ2 - Network Communication Module LINQ2 provides remote IP access to real-time data from eFlow power supply/chargers to help keep systems up and running at optimal levels. It facilitates fast and easy installation and set-up, minimizes system downtime, and eliminates unnecessary service calls, which helps reduce Total Cost of Ownership (TCO) - as well as creat- ing a new source of Recurring Monthly Revenue (RMR).
Page 8 4.5” (114.3mm) (69.9mm) 1.115” (28.3mm) 1.36” (34.5mm) 1.25” (31.8mm) Hartmann Controls is not responsible for any typographical errors. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 10 Lockhart Rd, Barrie, ON L4N 9G8, Canada | phone: 1-877-411-0101 web site: www.hartmann-controls.com | e-mail: sales@hartmann-controls.com IITHC1 Kit Series F11U...

This manual is also suitable for:

T1hck3f4