Table of Contents
Advertisement
Important safety instructions
1. FCC NOTICE
FCC STATEMENT
This equipment generates and uses ISM frequency energy and
if not installed and used properly, that is in strict accordance
with the manufacturer's instructions, may cause interference to
radio and television reception. It has been type tested and found
to comply with limits for ISM Equipment pursuant to part 18 of
FCC Rules, which are designed to part 18 of FCC Rules, which are
designed to provide residential installation.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following:
•
Reorient the receiving antenna of the radio or television.
•
Relocate the Microwave Oven with respect to the receiver.
•
Move the microwave oven away from the receiver.
•
Plug the microwave oven into a different outlet so that the
microwave oven and the receiver are on different branch
codes.
The manufacturer is not responsible for any radio of TV
interference caused by unauthorized modification to this
microwave oven. It is the responsibility of the user to correct such
interference.
SAVE THESE INSTRUCTIONS
4 English
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC RF exposure requirements, a separation distance of 20
cm or more should be maintained between the antenna of this device
and persons during device operation.
To ensure compliance, operations at closer than this distance is not
recommended.
WARNING
Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Advertisement
Table of Contents
