Maintenance - Ryobi RR18 Manual

Hide thumbs Also See for RR18:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
PLAY/PAUSE BUTTON
In BLUETOOTH mode, press the play/pause button to
play/pause streamed audio. Press and hold the play/pause
button to disconnect the BLUETOOTH® enabled device.
PRESET STATION BUTTON
The memory feature saves up to 20 frequencies as presets
in the radio's memory. You can save 10 frequencies in FM
mode and 10 in AM mode.
To store a frequency in memory:
Tune to the frequency you want to save.
Press and hold the PRESETS button for 1 second. A
memory location number will blink on and off.
Press either arrow button to scroll through the memory
locations.
Press the PRESETS button to store the frequency in the
selected memory location.
To recall a preset frequency:
Press the PRESETS button and quickly release to cycle
through stored frequencies.
ARROW BUTTONS
In BLUETOOH mode: Press the arrow buttons on the radio
to go to the previous or next track.
In radio mode: Press the left arrow button to tune to a lower
frequency. Press the right arrow button to tune to a higher
frequency. Briefl y push either button (not press and hold)
to tune one frequency step at a time. Press and hold the
desired arrow button for one second to tune to the next
frequency with clear reception.
USB CHARGING PORT
Connect a USB device to the USB charging port to get
power from the product. When the product is turned off, the
USB charging port does not supply power.

MAINTENANCE

Use only original accessories and spare parts. Should
components need to be replaced which have not been
described, please contact an authorised service centre.
All repairs should be performed by an authorised service
centre.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
SYMBOLS ON THE PRODUCT
Safety alert
V
Volts
Direct current
European Conformity Mark
4
Original Instructions
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Please read the instructions carefully before
starting the product.
Do not dispose of waste batteries, waste
electrical and electronic equipment as
unsorted municipal waste.
Waste batteries and waste electrical and
electronic equipment must be collected
separately. Waste batteries, waste
accumulators, and light sources have to be
removed from the equipment.
Check with your local authority or retailer for
recycling advice and collection point.
According to local regulations, retailers
may have an obligation to take back waste
batteries and waste electrical and electronic
equipment free of charge. Your contribution
to the reuse and recycling of waste batteries
and waste electrical and electronic equipment
helps to reduce the demand of raw materials.
Waste batteries, in particular containing
lithium, and waste electrical and electronic
equipment contain valuable and recyclable
materials, which can adversely impact the
environment and the human health if not
disposed of in an environmentally compatible
manner. Delete personal data from waste
equipment, if any.
SYMBOLS IN THIS MANUAL
Note
Parts or accessories sold separately
Waiting time

Advertisement

Table of Contents
loading

Table of Contents