Advertisement
before using misting fan. Spilled water and leaks can
result in a slippery surface and create a slip and fall
hazard.
■
To reduce the risk of personal injury and electric
shock, the portable fan should not be played with or
placed where small children can reach it.
■
Ensure battery compartment cover is completely
closed to prevent water from contacting battery or
entering battery port.
■
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
■
Do not place battery tools or their batteries near
fire or heat. Following this rule will reduce the risk of
explosion and possibly injury.
■
Never use a battery that has been dropped or
received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
■
Exhausted batteries are to be removed from the product
and safely disposed of.
If the product is to be stored unused for a long
■
period, the batteries should be removed.
Ensure that the product is switched off from the
■
supply mains before removing the guard.
The supply terminals are not to be short-circuited.
■
Batteries can explode in the presence of a source
■
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
■
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
■
Do not expose the product to rain. Water entering
the product will increase the risk of electric shock or
malfunction.
■
For best results, your battery tool should be charged
in a location where the temperature is more than
10°C (50°F) but less than 38°C (100°F). Do not store
outside or in vehicles.
■
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and
water, then neutralize with lemon juice or vinegar.
If liquid gets into your eyes, flush them with clean
water for at least 10 minutes, then seek immediate
medical attention. Following this rule will reduce the
risk of serious personal injury.
Keep the product dry, clean and free from oil and
■
grease. Always use a clean cloth when cleaning.
■
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also
to prevent misuse of the product and possible injury.
ADDITIONAL BATTERY SAFETY WARNINGS
■
To reduce the risk of fire, personal injury, and product
4
Original Instructions
damage due to a short circuit, never immerse your
battery pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
■
Ambient temperature range for battery during use is
between 0°C and 40°C.
■
Ambient temperature range for battery storage is
between 0°C and 20°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that no
batteries can come in contact with other batteries or conductive
materials while in transport by protecting exposed connectors
with insulating, non-conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
■
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■
When servicing, use only original manufacturer's
replacement parts, accessories and attachments. Use
of any other parts may create a hazard or cause product
damage.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
■
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and can be damaged by their
use. Use dry cloths to remove dirt, dust, oil, grease, etc.
■
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
SYMBOLS
Safety alert
V
Volts
Direct current
T
The product can be used in a tropical
climate.
Regulatory Compliance Mark (RCM).
Product
meets
requirements.
Please read the instructions carefully
before starting the machine.
applicable
regulatory
Advertisement
