Advertisement
Purpose: The document is intended for use by end-of-
life recyclers or treatment facilities. It provides the basic instructions for the disassembly of products to remove component
s and
materials requiring selective treatment.
1. Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screw driver
2. Product disassembly Process
2.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment :
2.2 OPTIONAL : Depending upon the complexity of the disassembly process, a graphic depicting the locations of items
contained within the product which require selective treatment (with descriptions and arrows identifying locations) can be
inserted below:
2.3 How to describe the basic steps to disassembly a components.
1) Provide a picture of disassembly process
2) All the screws are showed in the picture
3) All the PCBAs are showed in the picture
4) LCD panel are showed in the picture
5) All the accessories like remote controller, batteries, and cables are showed in the picture
Caution: SVC man must check insulation sheet on the module before assembling
the set
1. Unscrew the stand base by using coin
ASSEMBLE AND DISASSEMBLE
- 15 -
Tool Size (if applicable)
Copyright © 2023 LG Electronics Inc. All rights reserved.
Only training and service purposes
Advertisement
