Sharpcap Will Start The Imaging Process - MallinCam SkyRaider DS10 User Manual

SkyRaider DS10 User Manual July 14, 2018
The Pop-Up Window gives you some familiarity with settings as it provides you
with more comfortable units (exposure time in ms).
You can choose the Exposure Tab in the Filter window to slide the Tab to match
the exposure time in ms (divide by 1000 to get seconds).
You can also Click on the Time setting on the right of the Slider to Pop-Up a
window that allows you to directly enter in the time in ms.
You can also control the Gain in the window.
The other Tabs in the Window will also you to adjust other settings in the SkyRaider
Camera.
Once you are comfortable with the settings, Click on the OK Button in the
Properties window to close it.

SharpCap will start the imaging process

and will, on the bottom of the
window, display information about the exposure and remaining time. You can
watch the green status bar move to the right as the exposure is being taken.
SkyRaider DS10 User Manual Page 164