Mitsubishi Electric TRANE NTXAMT12A112AA Service Manual page 62

13.4. Blower/Fan Assembly
CAUTION
Exercise caution when removing heavy parts.
1. Remove the Blower and Filter panel (along
with filter if installed) indicated in section 2.
2. Remove the (1 or 2) brackets that secure the
coil assembly.
3. Unplug CN44 and motor plug (CNMF) from
control box.
4. Remove the (2) screws that secure the control
box and then remove the control box.
5. Remove coil panel and smaller drain panel.
6. Remove the (2) screws that secure the fan
assembly and slide out.
Specifications are subject to change without notice.
NTXAMT12, 18, 24, 30, 36A112AA
62 © 2022 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Fig. 10
Fig. 11
Fig. 12