Akicon NX-Hood 30 Installation Manual

Advertisement

MFG PART # :
AK-HS30H-BS
AK-HS30H-JB
AK-HS30H-SW
AK-HS30H-C
AK-HS30H-MG
This product is designed for two specific ventilation methods: top ventilation and rear wall ventilation.
It is not compatible with side cabinet ventilation.
I would recommend conducting an electrical test before installation to ensure that the product
functions properly. If you encounter any issues during the installation process, please
don't hesitate to contact us at our after-sales service email address: service@akiconshop.com.
We will provide you with installation videos for reference.
There is an 8-inch pre-drilled hole at the rear of the product. Please ensure that the power panel
is positioned to align with this hole. When arranging the placement of the ventilation duct and the
power panel, be sure to do so thoughtfully to avoid any conflicts or obstructions.
Installation Manual
MODEL NO.: NX-Hood 30 / 36
AK-HS36H-BS
AK-HS36H-JB
AK-HS36H-SW
AK-HS36H-C
AK-HS36H-MG
Prior to installation, please read
the safety instructions carefully.
AK-HS30L-BS
AK-HS30L-JB
AK-HS30L-SW
AK-HS30L-C
AK-HS30L-MG
5011098
AK-HS36L-BS
AK-HS36L-JB
AK-HS36L-SW
AK-HS36L-C
AK-HS36L-MG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NX-Hood 30 and is the answer not in the manual?

Questions and answers

Summary of Contents for Akicon NX-Hood 30

  • Page 1 Installation Manual MODEL NO.: NX-Hood 30 / 36 5011098 MFG PART # : AK-HS30H-BS AK-HS36H-BS AK-HS30L-BS AK-HS36L-BS AK-HS30H-JB AK-HS36H-JB AK-HS30L-JB AK-HS36L-JB AK-HS30H-SW AK-HS36H-SW AK-HS30L-SW AK-HS36L-SW AK-HS30H-C AK-HS36H-C AK-HS30L-C AK-HS36L-C AK-HS30H-MG AK-HS36H-MG AK-HS30L-MG AK-HS36L-MG Prior to installation, please read the safety instructions carefully.
  • Page 2 Step 1: Remove the insert vent from the hood. 36" 30" Loosen 2 pcs screws on the panel. Loosen 6 pcs screws on the panel. 30" 36" 30/36" Loosen B screws and A plug to Loosen 6 pcs screws on the housing. remove the button.
  • Page 3 Install the hood on the wall. Install ventilation duct and plug in. Step 3: Install the insert vent on the hood. 30" 36" Secure 6 pcs screws on the housing. Secure B screws and A plug to reinstall the button. 36"...
  • Page 4 AKICON INC. Tel: 1-(302)213-4406 Toll Free Number: 1-(888)-828-2025 Email: service@akiconshop.com Website: www.akiconshop.com / www.akicon.com Address: 108 EAST 13TH ST, WILMINGTON, DE 19801 US...

This manual is also suitable for:

Nx-hood 36Ak-hs30h-bsAk-hs30h-jbAk-hs30h-swAk-hs30h-cAk-hs30h-mg ... Show all

Table of Contents