This manual is consistent with the date of manufacture appropriate, wear dust mask, hearing of your machine, you will find information on the protectors, gloves and workshop apron capable of technical data of the machine acquired manual check stopping small abrasive or workpiece fragments. for updates of our machines on the website: The eye protection must be capable of stopping flying debris generated by various operations.
Always use auxiliary handle, if provided, for maximum Do not position your body in line with and behind control over kickback or torque reaction during startup. the rotating wheel. When the wheel, at the point of The operator can control torque reactions or kickback operation, is moving away from your body, the possible forces, if proper precautions are taken.
2.3. NOISE/VIBRATION INFORMATION When working stone, use dust extraction. The vacuum cleaner must be approved for the extraction of The values given are valid for nominal voltages stone dust. Using this equipment reduces dust related [U] 230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For hazards.
3_ASSEMBLY 3.3. APPROVED GRINDING TOOLS All grinding tools mentioned in these operating 3.1. MOUNTING THE PROTECTIVE DEVICES instructions can be used. The permissible speed [rpm] or the circumferential Before any work on the machine itself, pull speed [m/s] of the grinding tools used must at least the mains plug.
Stayer power tools. The machine must always work in In all correspondence and spare parts order, please an upgrinding always include article number given on the type plate motion.
Page 9
Do not connect the blue or brown wire to the earth terminal of the plug. Important: If for any reason the moulded plug is removed from the cable of this power tool, it must be disposed of safely. 5.2. AFTER-SALES SERVICE AND CUSTOMER ASSISTANCE Our after-sales service responds to your questions concerningmaintenance and repair of your product as...
Page 11
Área Empresarial Andalucía - Sector I Calle Sierra de Cazorla nº7 C.P: 28320 Pinto (Madrid) SPAIN info@grupostayer.com www.grupostayer.com...
Need help?
Do you have a question about the FH900C and is the answer not in the manual?
Questions and answers