BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 ℃ 41 ℉ - 35 ℃...
Important Safety Instructions 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
Features Ÿ 10 seconds of anti-shock memory Ÿ Instant start Ÿ Seamless loop Ÿ Pitch range : +/-100% +/-0.1% Ÿ 4 banks for Sampler and Cue memory, <5 sec. Each bank Ÿ Mixer between music and sampler Ÿ Auto cue function (-48dB) Ÿ...
Page 5
OUT button is pressed once again. 5. RELOOP BUTTON - If a seamless loop has been made, but the CD player is not actively in seamless loop mode (a loop is not playing), pressing the RELOOP button will instantly reactivate the seamless loop mode.
AUDIO OUT-SOCKETS - signal requires RCA (left & right) connections. Connect this output to the respective input of your mixer (Line/Aux). 22. DIGITAL OUT-SOCKET - requires one SP/DIF (75 Ohm) connection. Connect this output to the respective input of your mixer / computer.
Set-up 1.Checking the Contents Check the carton and packaging contents for the following items: 1. Tabletop unit 2. Operating instructions 3. One RCA cable. 4. One AC power cord. 2. Installing the Unit 1. Place your unit on a flat leveled surface. 2.
Page 8
Operating instructions 1.Opening and Closing This operation only works when the power is on. Press the OPEN/CLOSE button to open or close the disc tray, or press PLAY button, the disc tray automatically closes. If tray is not closed after 60 seconds it will close automatically and pause.
Page 9
(2) By rapidly pressing the BANK1 or BANK 2 or BANK 3 or BANK4 buttons 21.Sleep Mode The CD player automatically shuts off the transport and laser after 15 minutes (when in pause or cue mode). This will lengthen the life of your motor drive and laser.
Need help?
Do you have a question about the S-350 and is the answer not in the manual?
Questions and answers