Stanton C.402 User Manual page 6

NAMES AND FUNCTIONS
Main Unit
(1) POWER (Power ON/OFF Switch)
When the POWER switch is pressed, the power turns
on.
(2) DISC HOLDER
Place the discs in the holder. Press the OPEN/CLOSE
button to open and close the disc holder.
(3) OPEN/CLOSE
Press this button to open and close the disc holder. The
disc holder cannot be opened during playback, so stop
playback before pressing the button.
(4) SGL/CTN (Single/Continuous Button)
Press this button to switch between single and continuous
play modes. SINGLE mode is indicated by the
SINGLE indicator on the LCD.
(5) TIME (Time Button)
Press this button to switch the time display among the
elapsed time and remaining time and total remaining time
of the disc.
(6) TRACK BACKWARD
Use this button to go back to the beginning of the
current track or select a previous track for playing.
(7) +10/ FOLDER
CD mode, use this button to skip ahead 10 tracks.
Mp3 mode, press this button to select next folder.
(8) TRACK FORWARD
Use this button to skip to the next CD track.
(9) RELOOP
Depending on mode, as explained further, this button is
used for either repeating a previously set loop or
seamlessly stuttering on the last set cue point.
(10),(11) F.FORWARD/F.BACKWARD
Press these buttons to perform the scan function during
pause mode or during play mode.
(12)
LCD
(13) PITCH SLIDER
Use the slider to adjust the CD pitch. Slide up to
decrease the pitch, down to increase the
(14)
PITCH LOCK
Use this button
adjustment with the pitch sliders. BPM adjustment with
the pitch sliders is disabled when the PITCH LED lights.
(15)
PITCH +/- BUTTON
+ The CD speeds up while this button is pressed.
Release the button to return to the original BPM.
- The CD slows down while this button is pressed.
Release the button to return to the original BPM.
(16)
PITCH RANGE
Choose from pitch percentages of 4%, 8% and 16%.
(17)
PLAY/PAUSE
Use this button to start playback. Press once to start
playback, once again to set the pause mode, and once
more to resume playback.
(18)
LOOP OUT
Used for setting the end loop point and releasing the loop
action.
(19)
CUE (Cue Button)
Press the CUE button during playback to return to the
position at which playback started.
(20) LOOP IN
Used for setting a start loop point and releasing the
loop action.
(21)JOG WHEEL(JOG dial)
When the dial is turned during CD pause, the point at
which the sound is being produced moves by a number
of frames corresponding to the number of clicks.
Clockwise moves the point forward, counterclockwise
moves the point backward.
5
pitch.
to enable or disable BPM