Control Overview; Top Panel - Stanton C.324 User Manual

Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12

CONTROL OVERVIEW

35
34
33
32
31
30
29
TIME – Switches the time value displayed on the LCD between
1.
elapsed track time, remaining track time, and the total remaining time
for the entire disc. Markers next to the time readout indicate which of
these modes is enabled.
REPEAT – When in SINGLE mode, the unit will repeat the current
2.
song. In Continuous mode, the unit will repeat the entire disc.
CTN/SGL – Toggles between Continuous and Single play modes.
3.
Continuous mode operates like a normal CD player, playing the entire
disc without stopping. Single mode only plays one track at a time,
returning to the Cue point when the track is completed. The LCD will
display "SINGLE" when in that mode.
TOUCH REWIND – Enables the jog wheel to facilitate beat juggling
4.
by simply tapping the surface area of the jog wheel. Touching and
releasing the jog wheel once will return playback to the last marked
Cue point.
VINYL – Enables the touch sensitive jog wheel (#21) to respond like
5.
a turntable. During normal play mode, touching the platter will pause
playback, and moving the platter forward or backward will create
scratch sounds.
BROWSE – This button activates the browsing feature. As the name says,
6.
it allows you to browse the tracks on your CD without actually selecting
each one as you go down the list. With this function active, turn the
encoder to browse, and push on the encoder to select. This function
works with both MP3 and audio discs.
7
2 4
1 3
3 5 6 8
28 27 26
11
9 10 12 13 14
24
25
FX TIME ENCODER – This multi-function encoder controls various
7.
parameters of the unit, depending on the selected mode: FX Time,
Sampler volume, Vinyl start time, and MP3 browsing. See operating
instructions for further explanation.
MINUS BUTTON – Moves the Time Division Indicator (#10) to the left
8.
(for use with the DSP FX (#14)).
LCD DISPLAY – Shows various information on the status, modes,
9.
and functions of the unit.
10. TIME DIVISION INDICATOR – Indicates the time division (in beats)
used by the DSP FX (#14). When 1/4 is selected, the activated FX
will modulate with every quarter beat; 1/2 signifies half beats; 3/4
signifies three quarter beats; 1/1 signifies one beat; 2/1 signifies 2
beats; and 4/1 signifies 4 beats (1 measure).
11. FX RATIO ENCODER – This multi-function encoder controls various
parameters of the unit, depending on the selected mode: FX Ratio,
Sampler pitch, Vinyl brake time, and MP3 folder browsing. See operating
instructions for further explanation.
12. FOLDERS – With the browsing function active, this button enables
browsing of folders on an MP3 disc. With this function enabled, turn
the encoder to browse folders. Disable to browse all tracks on the
disc.
13. PLUS BUTTON – Moves the Time Division Indicator (#10) to the right
(for use with DSP FX (#14)).
4

TOP PANEL

15
16
17
18
19
20
21
22
23