Basic Operation; Selecting & Playing Voices - Stagg STK-520 User Manual

BASIC OPERATION

Selecting & playing voices
The keyboard has 147 PCM voices and percussion kits that you can select and play on the keyboard.
Before you select a voice, make sure you have selected VOICE mode. Press the [VOICE] button to
select the VOICE mode.
The [-/OFF] and [+/ON] buttons:
When the VOICE mode is selected, these buttons step up or down through the voices list. Press these
buttons briefl y to step to the next voice in the corresponding direction, or hold the button to scroll
rapidly through the voices in the corresponding direction. The selected voice number shows in the
display.
The number buttons:
The number buttons can be used to directly enter the number of the desired voice, thereby immediately
selecting that voice without having to step through a number of other voices.
Two-digit voice number are selected simply by entering the two digits in sequence - e.g. to select
voice number 17, briefl y press the [1] button and then the [7] button. Three digit voice number - e.g.
to select voice number 100, are entered by fi rst pressing the [+] and [1] buttons, then press the
remaining two digits in sequence [0], [0].
STK-520
9
� � �
� � �
� � �
�
� �
1
2
USER MANUAL