Modulation/Portamento; Mixer Control; Memorize Panel Settings - Stagg STK-520 User Manual

6. Modulation/Portamento

Press the [FUNCTION] button as many time as necessary until «ModU» appear in the display, you can
use the [-/NO]/[+/YES] button to switch between ModU(modulation) or PoRT(portamento).

MIXER CONTROL

Press the [MIXER] button as many time as necessary until your desired track appear in the
display, you can use the [-/NO]/[+/YES] button to adjust the volume level of each track.
Track On Display
Oc Volume
Up Volume
Drum
Volume
Bass
Volume
When you press the [-/NO] and [+/YES] buttons simultaneously, the keyboard will shut
down the volume of the selected track. Press the two buttons simultaneously again to turn
the accompaniment track volume on.

MEMORIZE PANEL SETTINGS

The keyboard has 6 memory pads which can be used to memorize the control-panel setups.
You can press one of the MEMORY button (
Register the settings:
When you have fi nished the settings, you press and hold the [STORE] button, then press one of
the MEMORY button. Any data that was previously in the selected location is erased and MEMORY button. Any data that was previously in the selected location is erased and MEMORY
replace by the new settings.
Note:
When you turn off the keyboard, the setting will be erased.
STK-520
Range Default Setting
OC 0...31
UP 0...31
dR 0...31
bS 0...31
MEMORY MEMORY button ( M1-M6) to recall the setups at any time.
23
28
23
23
17 USER MANUAL