Table of Contents
Advertisement
Available languages
Available languages
EN
Dear Customer,
Welcome to use our Body Fat/Hydration Monitor Scale.
This product is specially designed to test body fat/hydration/muscle/bone, help
keep a close eye on the daily change of your body fat, hydration ,muscle, bone
and weight, providing information for your reference. Base on the analysis of your
height,weight and age etc., it tells your daily energy requirement, and helps
control your weight. Please read this instruction carefully before use.
USER-FRIENDLY TIPS
1.During Measuring
A. The device is designed to allow auto step on. Please always ignore the first
reading and only start taking effective record from the second time weighing.
B. Always remove your shoes and socks , wipe clean your feet before using.
C. Step on the weighing platform gently.
D. It is advisable to take measurement at the same time of the day.
E. Measured result could be misleading after intensive exercise, excessive
dieting or under extreme dehydration condition.
F. Always weigh/use the scale on a hard and flat surface. When you are
measuring, please keep still.
G. The measured data of the following people may have deviation:
Children under 10 or adult over 100 (can only use the device under normal
weighing mode)
Adult over 70，children aged 17 and younger.
Body building athletes or other occupational athletes.
H. People with the following conditions should not use the device:
Pregnant women
Those with symptom of edema
Those on dialysis treatment
Those who use heart pacemaker or with other implanted medical device.
2. Safety Warning
A. The Fat% Hydration% content evaluated by the Fat Monitor Scale is only for
reference (not for medical purpose). If your Fat% Hydration% content is
over/below normal level, please consult your doctor for more advice.
B. Keep away from strong electro-magnetic field when using the scale.
C. It could be slippery if you weigh on a wet surface. Moreover, if the weighing
platform surface is glazed, never step on the edge of the scale and do keep
balance during your weighing.
15
FEATURES/SPECIFICATIONS
1. Using high precision strain gauge sensor
2. Optional normal weighing mode : Auto step on weighing and consecutive
add-on weighings
3. Built-in memory for 12 different users
4. Auto user recognition function
5. Multifunction: test body fat %, body hydration %, body muscle%, body bone%,
BMI and suggest calorie intake requirement.
6. Low battery and overload indication
7. Body fat % range:4.0%~75.0%,measurement division:0.1%
TO REPLACE BATTERY AND CHARGE
1. 1.5V(AA/AAA)batteries(excluded)
Open the battery cover.Install new batteries by putting
one side of the battery down first and pressing down
the other side.(Please observe the polarity)
2. CR2032 lithium batteries (included).
Remove isolation sheet before use;
Open battery cover and take out the used battery with
the aid of a sharp object.Install new battery by putting
one side of the battery beneath the battery baffle and
then pressing down the other side.(Please observe the
polarity)
WEIGHT UNIT SETTING
Switch on the scale and press the UNIT button at the
back of scale to convert weight unit.
Remark:
The unit system of scale depends on scale destination
or the requirement of distributor.
16
EN
Battery baffle
U NI T
Back of the scale
Advertisement
Table of Contents
