Operation Instructions
●
Installation of Remote Controller
1. Separate the base of the wired remote controller. Please follow the procedure:
Use flat screwdriver to insert the groove and rotate lightly.
Be careful, do not break the claws near the groove, if the claws are broken then wired remote controller
will not easily fix on the base.
2. Installation for screws.
Please use the screws attached in the accessory assembly, fixed by opposite angle position.
Name of each part
Main Function Introduction
NOTE !
Always press once to turn the Remote-Control LCD light ON.
SCAN ME
Scan this QR code with your mobile device to
see further instructions on how to maximize the
functions of your air conditioner and for other
related information.
- 4 -
Operation Instructions