Toro Recycler SmartStow 20340 Operator's Manual page 19

Figure 22
2. Ensure that the cutting-height setting on the
machine is 92 mm (3-5/8 inches) or lower. If
it is not, lower it; refer to
Height (page 12).
3. Disengage the handle locks
Figure 23
1. Handle lock disengaged
positions
4. Fold the handle fully forward
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
5. Engage the handle locks.
6. Lift the front of the machine by the handle and
move it into a storage space
decal133-8198
Adjusting the Cutting
(Figure 23).
g186012
2. Handle lock engaged
position
(Figure 23).
(Figure 24).
19
Figure 24
g186013