Table of Contents
Advertisement
Time-setting options
en
Activation
Combine the two hotplates which each have different
heat settings.
Select one of the two hotplates which are included in
1.
the move function.
Touch the
symbol. The
ù
2.
The heat settings appear in the displays for the two
hotplates.
The function is activated.
Notes
The display for the hotplate on which the cookware
■
is placed lights up more brightly.
The
indicator lights up on the display for the
¬
■
hotplate that is still selected.
Changing the heat setting
Select one of the two hotplates which are included in
the move function and change the heat setting in the
settings range.
If the function is deactivated, the heat settings
Note:
return to the preset values
Deactivation
Touch the
ù
symbol.
The function is deactivated.
When one of the two hotplates is set to
Note:
function is deactivated within approx. 10 seconds.
18
indicator lights up.
Ú
, the
‹
OTime-setting options
Y our hob has two timer functions:
T i m e - s e t t i n g o p t i o n s
Programming the cooking time
■
Kitchen timer
■
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
Select the hotplate and the required heat setting.
1.
Touch the
0
symbol.
2.
the hotplate.
lights up on the timer display.
‹‹
Within the next 10 seconds, set the required cooking
3.
time in the settings range.
After a few seconds, the time begins to elapse.
Notes
The same cooking time can be set automatically for
■
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
If the CombiZone function is selected for the
■
combined hotplate, the set time for both hotplates is
the same.
Changing or cancelling the time
Select the hotplate and then press the
Change the cooking time using the programming zone
or set to
in order to cancel the time.
‹‹
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up
the display.
When the
symbol is pressed, the indications turn off
0
and the beeping stops.
Notes
To set a cooking time of under 10 minutes, always
■
touch 0 before you select the required value.
If a cooking time was programmed for several
■
hotplates, the time information for the selected
hotplate is shown in the timer display.
Select the relevant hotplate to call up the remaining
■
cooking time.
You can set a cooking time of up to
■
x
lights up on the display for
symbol.
0
‹‹
for 10 seconds in
minutes.
ŠŠ
Advertisement
Table of Contents
