Installing The Back Cover; Removing The Battery Module - Dell XY689 Owner's Manual

Figure 2.

Installing the back cover

1. Align the back cover with the screw holes on the computer.
2. Tighten the screws to secure the base cover to the computer.
3. Follow the procedure in

Removing the battery module

1. Follow the procedure in
2. Remove the back cover.
3. To remove the battery:
a. Disconnect the battery cable from the connector on the system board [1].
b. Remove the screws that secure the battery to the computer [2].
c. Lift and remove the battery from the computer [3].
14
After working inside your computer
Before working inside your computer.