LG 32UK500 Owner's Manual page 20

20
Game Adjust Response Time
FreeSync
Black Stabilizer
Color Adjust Gamma
Color Temp
Red
Green
Blue
Six Color
Picture Reset Do you want to Picture reset your settings?
No
Yes
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Normal. For a fast-
moving picture, it is recommended that you use Fast.
Setting to Fast may cause image sticking.
Fast
Sets the response time to Fast.
Normal Sets the response time to Normal.
Slow Sets the response time to Slow.
Off Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of the
input signal with that of the output signal.
CAUTION
Supported Interface: DisplayPort,HDMI.
y
Supported Graphic Card : A graphic card that supports AMD's FreeSync is
y
necessary.
Supported Version : Make sure to update the graphic card to the latest driver.
y
For more information and requirement, refer to AMD website at http://www.
y
amd.com/FreeSync
Extended
Enable wider frequency range of FreeSync function than basic
mode.
The screen may flicker during the game play.
Basic Enable basic frequency range of FreeSync function.
Off FreeSync function off.
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen.
(You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases
the dynamic contrast on the screen.
Mode 1, Mode 2, The higher the gamma value, the darker the image becomes.
Likewise, the lower the gamma value, the lighter the image
Mode 3
becomes.
Mode 4 If you do not need to adjust the gamma settings, select Mode 4.
Custom The user can adjust it to red, green, or blue by customization.
Warm Sets the screen color to a reddish tone.
Medium Sets the screen color between a red and blue tone.
Cool Sets the screen color to a bluish tone.
Manual The user can fine-tune the color temperature.
You can customize the picture color using Red, Green, and Blue colors.
Meets the user requirements for colors by adjusting the hue and saturation of
the six colors (Red, Green, Blue, Cyan, Magenta and Yellow) and then saving the
settings.
Hue
Adjusts the tone of the screen colors.
Saturation
Adjusts the saturation of the screen colors. The lower the value,
the less saturated and brighter the colors become. The higher
the value, the more saturated and darker the colors become.
Cancel the select.
Returns to the default settings.