Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rocstor SolidRack R3110
Summary of Contents for Rocstor SolidRack R3110
- Page 1 ® SolidRack Rack Enclosure With Side Panels & Rear Doors User Manual...
-
Page 2: Table Of Contents
Table of Contents Page Rocstor Legal Disclaimer Introduction Important Safety Information Safety Instructions Component Identi cation Hardware and Accessories Level the Rack Cabinet Join the Cabinets Ground the Cabinet 10, 11, 12 Enclosure Con guration Enclosure Installation Five-Year Factory Warranty... -
Page 3: Rocstor Legal Disclaimer
Copyright, intellectual, and all other proprietary rights in the content of the manual (including but not limited to software, audio, video, text, and photographs) rests with Rocstor or its licensor. All rights in the content are the property of Rocstor and are not granted, licensed, assigned or otherwise passed to the purchaser’... -
Page 4: Introduction
Introduction SolidRack Rack Enclosure Cabinet – 4-Post Adjustable Depth (6" to 34.25") - Assembled - Includes Doors & Side Panels – 1760 lb (800 kgs) Static Load Capacity – 19” Rack Width - 600mm Wide x 1000mm Deep, 22U Enclosure - Floor Standing – Heavy-duty Cold-rolled Steel (CRS) –... -
Page 5: Important Safety Information
Important Safety Information Please review and read the instructions very carefully in order to understand the speci cation of the equipment. This is essential information before installing, operating, service or maintaining your equipment. These messages or alerts may appear throughout this publication and manual for your purchased equipment. The messages are designed to warn you of possible hazards or to bring to your attention the information that would assist and clari es steps and procedures. -
Page 6: Safety Instructions
Safety Instructions Please follow the essential and important instructions in this manual. The information provides you useful instructions for installation and customization of the rack or equipment. WARNING TIP/ HEAVY EQUIPMENT HAZARD • The content of this packaging is easily tipped. Please be extra careful and use extreme caution when moving or unpacking this cabinet. -
Page 7: Component Identi Cation
Component Identi cation Cabinet 1- Base Plate 7- Front Door 2- Front & Rear Frame 8- Rear Doors 3- Top Cover 9- Cable Management Accesses 4- Horizontal Bracket 10- Leveling Feet 5- Vertical Bracket 11 - Side Door 6- Side Panel 12- 2”... -
Page 8: Hardware And Accessories
Hardware and Accessories M6 Phillips-Head Screw M6 Cage Nut Cup Washer Hight < 27U: 20 sets 27U < Hight < 37U: 30 sets 37U < Hight < 47U: 40 sets Key (x3) To ensure proper and secure installation, cage nuts need to be installed horizontally as shown below. -
Page 9: Level The Rack Cabinet
Level the Rack Cabinet The leveling feet at the corners of the equipment provide a stable base if the door is uneven, but they cannot compensate for a badly sloped surface. Ensure the cabinet is in its intended location. Remove the front and rear doors. -
Page 10: Join The Cabinets
Join the Cabinets WARNING TIP HAZARD If multiple racks are used, joining cabinets provides limited stability to the cabinets. Secure the cabinet to the oor before installing equipment. Please follow these instructions very carefully. Failure to follow these instructions can result in death, serious injury, or equipment damage. Enclosures within the same row can be connected together by using Baying kits (sold separatly). -
Page 11: Ground The Cabinet
Ground the Cabinet DANGER HAZARD OF ELECTRIC SHOCK Connection of the cabinet to building Common Bonding Network (CBN) is required. Failure to follow these instructions will result in death or serious injury. Please note that each cabinet should be bonded directly to a common ground using one of the designated grounding points (M6 threaded inserts) at the bottom of the cabinet. -
Page 12: Enclosure Con Guration
Enclosure Con guration Plan for your installation in advance and make sure all mounting rails are adjusted or reversed for your required depth per your con guration needs. Door Locks Access Front and side doors have locks for added security. Each enclosure cabinets includes two keys that are able to open all the locks. - Page 13 Enclosure Con guration Con guring Cable Access Rocstor SolidRack provides an easy cable management con guration. The rectangular opening of top of the cabinet provides an easy access for cable management. The rectangular opening can easily be removed or installed back by unscrewing or screwing in the removable cable access panel.
- Page 14 Enclosure Con guration Rail Adjustment WARNING: Adjusting the rails while the rails are connected to the equipment will damage your equip mentand the enclosure. Do not adjust the rails when there is equipment installed in the cabinet. Also, make sure there are (2) two screws used per raid for properly secured equipment installation. Do not attempt to adjust the rails since it will accommodate for di erent mounting depth unless your equipment speci cation requires for a di erent mounting depth.
-
Page 15: Enclosure Installation
Enclosure Installation WARNING Use at least two people to unpack the enclosure. Move the Cabinet TIP/ HEAVY EQUIPMENT HAZARD • Be extremely cautious when moving or unpacking this rack/cabinet. • When moving or unpacking this cabinet. Two people are preferred and are required to move and unpack the cabinet. -
Page 16: Five-Year Factory Warranty
In the event Rocstor repairs or provide a replacement of a defective product or part, the warranty does not extend the original warranty period. Rocstor reserves the right to repair or replace any parts under warranty as new or factory re manufactured. -
Page 17: Contact Information
General sales information: sales@Rocstor.com Corporate sales information: corporate_sales@Rocstor.com Educational sales information: academic_sales@Rocstor.com Federal, State & Local government sales information: government_sales@Rocstor.com Resellers/Business Development/OEM Partners All Channel National and International Resellers, VARs, Consultants … contact Rocstor Channel Sales: call: +1 (818) 727-7000 Email: reseller_info@Rocstor.com...
Need help?
Do you have a question about the SolidRack R3110 and is the answer not in the manual?
Questions and answers