Table of Contents Page Rocstor Legal Disclaimer Important Safety Instructions Important Safety Information Introduction Feature Identi cation Hardware and Accessories Cage Nut installation 6, 7 Enclosure Installation Ground The Cabinet 9, 10, 11 Enclosure Con guration Wall Mounting the Enclosure...
Copyright, intellectual, and all other proprietary rights in the content of the manual (including but not limited to software, audio, video, text, and photographs) rests with Rocstor or its licensor. All rights in the content are the property of Rocstor and are not granted, licensed, assigned or otherwise passed to the purchaser’...
Important Safety Instructions WARNING Please follow the essential and important instructions in this manual. The information provides you useful instructions for installation and customization of the rack or equipment. • Wear appropriate personal protective equipment (PPE) when installing or con guring the cabinet. •...
Important Safety Information Please review and read the instructions very carefully in order to understand the speci cation of the equipment. This is essential information before installing, operating, service or maintaining your equipment. These messages or alerts may appear throughout this publication and manual for your purchased equipment. The messages are designed to warn you of possible hazards or to bring to your attention the information that would assist and clari es steps and procedures.
The cabinet’s door is reversible. Optional 120V dual fan that can be mounted on top (sold separately). Rocstor SolidRack cabinets are built strong and reliable with a 200lb weight capacity, 19”...
Hardware and Accessories Expansion Bolt M6 Screw M6 cage nut Plastic washer Key for front door Key for side panels Cage Nut Installation To ensure proper and secure installation, cage nuts need to be installed horizontally as shown below. Installing cage nuts in the incorrect orientation can cause injury or equipment damage.
Enclosure Installation CAUTION CAUTION, This symbol is used without the safety alert symbol, indicates a potentially hazardous situation which, if not avoided, can result in equipment damage. Please follow instructions carefully. Please follow instructions carefully. NOTICE NOTICE This symbol provides informations and practices not related to physical injury including certain environmental hazards, potential damage or loss of data.
Page 9
Enclosure Installation WARNING Use at least two people to unpack the enclosure. Move the Cabinet TIP/ HEAVY EQUIPMENT HAZARD • Be extremely cautious when moving or unpacking this rack/cabinet. • When moving or unpacking this cabinet. Two people are preferred and are required to move and unpack the cabinet.
Ground the Cabinet DANGER HAZARD OF ELECTRIC SHOCK Connection of the cabinet to building Common Bonding Network (CBN) is required. Failure to follow these instructions will result in death or serious injury. Ground Connection SolidRack use the most reliable and quality products. All doors and parts of the enclosure are grounded to the frame of the enclosure.
Enclosure Con guration Plan for your installation in advance and make sure all mounting rails are adjusted or reversed for your required depth per your con guration needs. Door Locks Access Front and side doors have locks for added security. Each enclosure cabinets includes two keys that are able to open all the locks.
Page 12
Enclosure Con guration Con guring Cable Access Rocstor SolidRack provides an easy cable management con guration. The rectangular opening of top of the cabinet provides an easy access for cable management. The rectangular opening can easily be removed or installed back by unscrewing or screwing in the removable cable access panel.
Page 13
Enclosure Con guration Rail Adjustment WARNING: Adjusting the rails while the rails are connected to the equipment will damage your equip- mentand the enclosure. Do not adjust the rails when there is equipment installed in the cabinet. Also, make sure there are (2) two screws used per raid for properly secured equipment installation. Do not attempt to adjust the rails since it will accommodate for di erent mounting depth unless your equipment speci cation requires for a di erent mounting depth.
Refrain from mounting the enclosure cabinet to the wall with equipment in the cabinet. Rocstor recommends the cabinet enclosure installation to be performed by professional or quali ed technician. Plan for the installation and make sure there are no equipment installed in the cabinet during installation.
In the event Rocstor repairs or provide a replacement of a defective product or part, the warranty does not extend the original warranty period. Rocstor reserves the right to repair or replace any parts under warranty as new or factory re manufactured.
Page 16
General sales information: sales@Rocstor.com Corporate sales information: corporate_sales@Rocstor.com Educational sales information: academic_sales@Rocstor.com Federal, State & Local government sales information: government_sales@Rocstor.com Resellers/Business Development/OEM Partners All Channel National and International Resellers, VARs, Consultants … contact Rocstor Channel Sales: call: +1 (818) 727-7000 Email: reseller_info@Rocstor.com...
Need help?
Do you have a question about the R106SH4 and is the answer not in the manual?
Questions and answers