Toshiba 62HM15A Service Manual page 19

3-2. Remove the 2 screws from the bracket, and then
remove the FAN for cooling Formatter Board (SK02).
3-3. Disconnect and replace the FAN transfer cable between
Ballast and Formatter Boards (SK09).
2 screws
4. Replacement of Thermostat (Lamp Sensor)
(SK04)
4-1. Replace the Thermostat (Lamp Sensor) (SK04),
remove 2 screws on the Thermostat.
2 screws
DMD FAN (SK02)
SK09
Thermostat (SK04)
5. Replacement of Ballast to Formatter Board
Cables (SK06 and SK08)
5-1. Disconnect and replace the cable between Ballast and
Formatter Boards (SK06).
5-2. Disconnect and replace the cable between Smooth
Picture and Formatter Boards (SK08).
SK06
8. LIGHT ENGINE UNIT
Location Parts No.
No.
A271 23405476
E998Z 23311153
SK01 23587525
SK02 23587526
SK03 23587527
SK04 23587528
SK06 23587536
SK08 23587538
SK09 23587539
– 16 –
DMD FAN
SK08
Description
OPTICAL ENGINE, LV-672 TB 0D
(Incl. E998Z, SK01-SK04, SK06,SK08,SK09)
EXCHANGE LAMP, PJ-D95-LMP
SERVICE KIT, LAMP FAN
SERVICE KIT, DMD FAN
SERVICE KIT, BALLAST FAN
SERVICE KIT, THERMOSTAT
SERVICE KIT, B TO F CABLE
SERVICE KIT, S TO F CABLE
SERVICE KIT, FAN TRANSFER CABLE