Table of Contents
Advertisement
[Bluetooth]
You can connect and set up devices that support Bluetooth.
[Share Network]
External devices can use the network through a Type C cable or HDMI cable (& Touch cable) connected to the product.
The product must be able to connect and use a separate network, and the external device can use the network simply
by connecting a cable to the product.
[Crestron Connected]
The connection status in the server format is indicated in diagrams and text.
You can select the server type you want to connect to. (Control System, Fusion To Device, Device To Fusion, XiO Cloud)
Content
Control System
Device To Fusion
Fusion To Device
XiO Cloud
•
[Disconnected]: Press the button once to try to connect to the server. The button text changes to [Connected] when
successful. In this case, the higher-level items cannot be changed. Press the button one more time to
disconnect or to change the higher-level items.
•
[Auto Discovery]: This is a feature that can find other Crestron equipment on the network.
•
[Use SSL]: You can set up communication security with the server. The following items are meaningful only when
[SSL] is turned on.
- [User Name], [Password]: If [Use SSL] is enabled on the server, you must enter the same [User Name] and
- [Verify Certificate]: This is a feature that checks if the certificate installed on the server is valid. If it is not valid,
there will be no connection to the server.
- [Manager Certification]: You must save the certificate to the set to perform the [Manager Certification] feature.
Description
•
[IP Address]: Enter the IP information of the server.
•
[Port]: Enter the port information of the server.
•
[IP ID]: This is a unique ID that distinguishes Crestron equipment on the server.
•
[Virtual Control Room Id]: This is a unique ID that distinguishes rooms on the server. If the
How to try to connect to the server from the set
•
[URL]: Enter the URL information of the server.
•
[Port]: Enter the port information of the server.
You can try to connect to the set from the server.
•
[Disconnected]: Press the button once to try to connect to the server. The button text
changes to [Connected]. Press the button one more time to disconnect.
[Password] set on the server to connect to the server.
Only certificates with .pem and .crt extensions are recognized. They can be added or
deleted through the menu. All saved certificates are deleted during [Factory Reset].
[IP ID] is the same but the [Room ID] is different, the server
recognizes it as different Crestron equipment.
99
Advertisement
Chapters
Table of Contents
