RAB STRINGER34 Instructions

INSTRUCTIONS
LED STRING LIGHT
RAB Lighting is committed to creating high-quality, a ordable, well-designed and energy-e cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We'd love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING:
- When using product, basic precautions should always be followed.
- Read and follow these instructions and observe all warnings.
- Carefully read and understand the information given in this manual before beginning installation. Failure to do so could
lead to electric shock, fire, or other injuries which could be hazardous or even fatal.
- Save these instructions and warnings.
CAUTION:
- Make sure the distances between live part and metal part of the device can satisfy reinforce or double insulation.
- Before intallation and maintenance of the device, please disconnect the power to prevent electric shock.
- The LED temporary light string must be intalled in an approriate environment, operating in harsh environments may shorten the
lifespan or enen damage the device.
- Please keep the device away from any corrosive substance, clean with dry cloth only.
- To ensure personal safety, please make sure the device is staying firmly and securely when install on high places.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
PRODUCT INFORMATION
Power Voltage
65W AC 120V
130W AC 120V
Application:
Suitable for construction sites or any other location requiring a temporary light string.
STRING34-50
Current
1.2A
2.4A
Qty Lumen
5 units 8000 lm
10 units 16000 lm
STRING34-100
Cable
Suitable for
18 SJTW / 2 AWG
Wet Locations
18 SJTW / 2 AWG