Panel Instruction - Grizzly G0881 Owner's Manual

2) Insert plug of remote control in socket of remote control correctly and tighten
firmly in order to prevent poor contact.
3) If remote control device is not be used, make sure the switch is on "OFF"
position, or welding current will not be adjusted on panel.
Warning!
Before connecting operation please make sure all the power is turned
off. The right order is to connect the welding cable and ground cable
to the machine first, and make sure they are firmly connected and
then put the power plug to the power source.

PANEL INSTRUCTION

The panel picture above is for reference only. If any difference with the real
machine, please follow with the real machine.