Sharp LC-40Q5000U Quick Start Manual page 9

Attach the Wall Mount Bracket (not included)
Before you begin the third-party manufacturer instructions, be
sure to do the following things:
1. Place the TV face down on a clean, safe and cushioned surface.
2. Remove the TV stand if you already attached it.
3. Place the spacers (not included) in the corresponding bracket
holes.
Spacer
(not provided)
CAUTION:
• When you attach the mount, be sure to use the spacers
(provided by the third-party manufacturer) between the TV
and the bracket.
• To prevent internal damage to the TV and ensure it is
mounted securely, be sure to use fixing screws (not
Screw
(not provided)
Bracket
(not provided)
provided) that are 8 ~ 10 mm (40") / 9.5 ~ 11.5 mm (43") in
length when measured from the attaching surface of the
mounting hook.
Rear cover of the TV
Wall mount hole pattern
VESA (mm)
Wall mount screw size
Follow instructions provided with the Wall mount bracket.
To complete the installation, please contact the wall-mount
manufacturer or the retailer from which you purchased the TV.
The selected screws are 8 ~ 10 mm (40") / 9.5 - 11.5 mm (43")
in length when measured from the attaching surface of the rear
cover. The diameter and length of the screws differ depending
on the Wall mount bracket model.
NOTE: The diameter and length of the screws differ depending
on the wall mount bracket model.
6
8 ~ 10 mm（40"）
9.5 ~ 11.5 mm（43"）
Wall mount bracket
Screw
Spacer
200 × 200
M6