Mechanical Installation - Hifonics PLUTO I User Manual

MECHANICAL INSTALLATION

• Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gas
tank or the like.
• Ensure that the chosen location provides a sufficient air circulation for the amplifier. Do not mount the device
into small sealed spaces without air circulation or near by heat dispersing parts or electrical parts of the
vehicle.
• All cables must be as short as possible to avoid losses and interferences.
• Use self-tapping screws (not included in delivery) to install the amplifier in the vehicle.
Fastening
BLC Installation A
Surface mount with housing
Screws not included
CAUTION
Before you start with the installation, disconnect necessarily the GROUND connection wire from
the battery to avoid any risk of electric shocks and short circuits.
BLC Installation B
Flush mount without housing
Disassemble the housing
ENGLISH
Dashboard or Center Console
Ø 7 mm
17