Inserting Phone Fig.3 Fig.2 Fig.1 UNLOC nsert phone into left clamp. Slide top clamp into Rotate to unlock top clamp. uppermost position.
Page 5
Inserting Phone (cont.) Fig.4 Fig.5 Fig.6 nsure phone is flat as possible Squeeze and pull right Release right clamp to o adapter. clamp past edge of phone. secure phone.
Align & Lock Fig.7 Fig.8 Fig.9 Slide phone vertically until Turn alignment screw until Slide top clamp down camera is roughly aligned camera is centered in camera against phone edge. cutout. with camera cutout.
Page 7
For the latest instructions on While holding top clamp Figure 11 shows a properly multiple camera phones, please visit tight to phone, rotate to aligned camera. If needed, www.carson.com/multicam. use alignment screw and top lock. clamp to make further adjustments.
Attaching to Optic Fig.12 Fig.13 Fig.14 Optic Adapter Ring Optic Adapter Ring For 10x Eyepiece For 16x Eyepiece Align optic adapter over Ensure that optic Select the ring the fits the eyepiece and press down adapter is flush to the eyepieces you will be firmly.
Page 9
Attaching to Optic (cont.) Fig.15 Fig.16 Turn on camera. If image To maximize your image, is not centered, repeat pinch to enlarge image. alignment steps. For best results, use in video mode.
TO REMOVE PHONE FROM ADAPTER: To save your alignment, make no further adjustments to the top clamp and alignment knob. Simply remove phone using right clamp only as shown in Fig. 4. USING ADAPTER AGAIN: The alignment of your phone to the adapter should be saved from the initial setup, so many steps can be skipped (FIG 1-2, 7-10) and only a quick fine adjustment of the alignment may be needed.
Page 11
Q3: I can’t align my phone vertically with the top clamp; it won’t fit. What should I A3: If you go through the alignment process and there is no way to achieve vertical alignment, because it’s restricted by the top clamp, try removing your phone case. Alternatively, you can remove top clamp assembly using screw as shown below in left figure.
Page 12
Q4: How do I know which phones will work with the adapter? A4: Please see the smartphone sizing guide below. S MA R T P H O N E S I Z I N G G U I D E If your phone (in its case) fits in "portrait"...
Page 13
Q6: My image doesn't appear to be centered or is not a complete round image; what's wrong? A6: The phone alignment needs to be adjusted in vertical direction using top clamp (FIG 7) and in horizontal direction by using alignment screw (FIG 8). Check that phone is flat on adapter (FIG 6), and adapter is flush with optic.
Tips & Tricks: PHOTOGRAPHY • Tap object of interest on your phone screen to autofocus. • For videos, tap and hold object of interest on phone screen for a second to lock focus. Tap again to release the focus lock. •...
• Adapter should be cleaned with soft, damp cloth only. Do not use any chemicals or abrasives. Customer Service: We will be happy to help you with any problems you may experience with your HookUpz Smartphone Microscope Adapter. Email us at info@carson.com or call toll-free at 1-800-967-8427.
Need help?
Do you have a question about the HookUpz MS-160SP and is the answer not in the manual?
Questions and answers