Toro TimeCutter HD MyRide 75212 Operator's Manual page 33

Hide thumbs Also See for TimeCutter HD MyRide 75212:
Table of Contents

Advertisement

Figure 35
5.
Separate the foam and paper elements
36).
Figure 36
Servicing the Foam Air-Cleaner
Element
Service Interval: Every 25 hours/Monthly (whichever
Every 100 hours/Yearly (whichever comes
first)—Replace the air-cleaner foam element
(more often in dusty, dirty conditions).
g027800
1.
Wash the foam element in liquid soap and
warm water. When the element is clean, rinse
it thoroughly.
2.
Dry the element by squeezing it in a clean cloth.
Important:
is torn or worn.
Servicing the Paper Air-Cleaner
Element
Service Interval: Every 100 hours—Clean the paper
Every 200 hours—Replace the paper air-cleaner
element (more often in dirty or dusty conditions).
g027801
1.
Clean the paper element by tapping it gently to
remove dust.
(Figure
Note:
element with a new one.
2.
Inspect the element for tears, an oily film, or
damage to the rubber seal.
3.
Replace the paper element if it is damaged.
Important:
g027802
33
comes first)—Clean the air-cleaner
foam element (more often in dusty,
dirty conditions).
Replace the foam element if it
air-cleaner element (more often in
dirty or dusty conditions).
If it is very dirty, replace the paper
Do not clean the paper filter.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter hd myride 75211Timecutter hd myride 75213

Table of Contents